RGB LED Light Strips 1.8M

King-size beds are 1830mm wide. The 1.8M RGB strip was made for them.

Running a single, uncut 1.8M strip behind a king-size bedhead gives an even, unbroken backlight across the full width of the bed — no join, no variation, no off-centre positioning to manage. It’s a small specification detail that produces a noticeably cleaner result than either running a shorter strip off-centre or piecing together two shorter units.

Beyond the bedroom, 1.8M is a useful length for kitchen splashback lighting (a standard 900mm bench length × 2 tiles deep sits in this range), under-peninsula lighting on a wider kitchen island, and the base lighting of a feature wall section in a living room or dining area.

The RGB system is the same across all strip lengths — Red, Green, Blue channels mixing to any colour across the full spectrum, with full dimmer control from maximum output to the softest ambient glow. At 1.8 metres, the colour wash across a wall section or shelf is broad enough to be genuinely immersive rather than a point-source accent — the difference becomes clear when the room is dark and the strip is the primary light source in that zone.

Self-adhesive backing applies without tools to clean, smooth surfaces. For longer runs, multiple 1.8M strips can be connected in series with compatible connectors.