Terra Deck – Teak Wood Fascia Board

Terra Deck – Teak Wood Fascia Board

$ 44.00
Co Extrusion Gen 5 Solid WPC Fascia Decking Board – Teak Wood (5400mmX140mmX10mm)
Premium Quality
Materials
Expert Guidance
& Support
Fast Melbourne Pickup
& Australia-Wide Delivery

PRODUCT DESCRIPTION

A Teak Wood deck has a particular quality — the golden-brown warmth creates an outdoor space that feels generous and inviting rather than cool or restrained. Getting the fascia right is what carries that feeling all the way to the edge of the structure.

The Terra Deck Teak Wood Fascia Board is 140mm wide, 10mm thick, and 5400mm long in solid Gen 5 co-extrusion WPC. It wraps the exposed sides of your deck frame in the same golden-brown tones as the Teak Wood decking surface — seamlessly extending the warmth of the deck right to its perimeter.

This is particularly important for alfresco dining areas and outdoor entertaining decks, where the fascia edge is often the first thing guests see when they approach the space. A colour-matched, solid fascia reads as intentional and finished. A mismatched or absent edge reads as an afterthought.

The Gen 5 polymer cap technology is what keeps the Teak Wood tone accurate over time. Golden-brown colours can bleach towards yellow or pale beige without UV protection — the polymer cap layer is UV-stabilised on all four sides of the board, which holds the colour through Melbourne’s UV conditions without needing any retreatment.

For coastal properties in Frankston, Mornington, or Seaford, the moisture and salt-air resistance of the solid WPC construction is a meaningful advantage. Real teak fascia at a coastal property requires frequent retreatment; this board simply doesn’t.

PropertySpecification
Width 140mm
Thickness 10mm
Length 5400mm
Q: Is the Teak Wood fascia board suitable for a coastal deck in Victoria?
A: Yes — it's one of the better choices for coastal applications. The Gen 5 polymer cap on all four sides is inherently moisture-resistant and doesn't require sealing or retreatment in salt-air environments. For fixings, A4-grade stainless steel screws are recommended in coastal locations to prevent corrosion staining on the board surface.
Q: Can Teak Wood fascia be used on a deck with a different brand's teak-toned boards?
A: Teak tones vary significantly between manufacturers — some are more golden, others more olive or amber. Titan Trade Centre strongly recommends comparing sample boards side by side in your outdoor light before committing to a mixed-brand installation. The safest approach for a precise match is to use Terra Deck decking boards and fascia from the same range.
Q: How wide does the fascia board sit relative to the deck surface height?
A: The 140mm width of the fascia board is designed to cover a standard composite deck frame including the decking board thickness. In most installations, the fascia runs from just below the deck surface to the bottom of the bearer, covering the full visible face of the frame. If your frame height varies, the fascia can be ripped down to a narrower width on site using a table saw or circular saw.
Q: Should fascia be installed after decking boards are laid or before?
A: Installing the decking boards first is the recommended sequence. It lets you confirm the exact finished height of the deck surface before cutting fascia lengths, and ensures the top edge of the fascia aligns precisely with the deck surface rather than sitting proud or recessed. Fit the bullnose last, after both the decking boards and fascia are in place.
Q: Can I use the Teak Wood fascia board to frame a raised garden bed or planter box?
A: Yes — the solid Gen 5 WPC construction is suitable for planter box cladding and raised garden bed edging. The material is moisture-resistant on all sides and won't rot or warp in contact with soil and water, making it a practical and attractive alternative to treated pine or hardwood for garden framing applications.
Q: What's the best way to join two fascia boards in a long continuous run?
A: Position the join over a frame member so both board ends are backed and supported. Cut both ends square, leave a 2–3mm expansion gap, and fill with a colour-matched flexible polyurethane sealant after fixing. For the neatest result, stagger joins away from eye-level viewing positions and ensure screws are set consistently along the board length.

GET A FREE SAMPLE

explore OTHER products

Why Customers Trust Titan Trade Centre

See why local tradies and homeowners rate us 5 stars for our materials, service, and quick turnaround times. Real feedback from customers who build with confidence.

INQUIRE NOW