RGB LED Light Strips

Reflekt+ Silicone RGB LED Light Strips

RGB strip lights are everywhere. Most of them are thin, plasticky, and get pulled off the wall six months later when the adhesive gives up.

These are different. The Reflekt+ silicone RGB strips have a 12mm x 13mm cross-section — chunky enough to diffuse the light evenly rather than showing individual LED dots through the housing. Two sealed ends keep moisture out, which matters for bathrooms, kitchen splashbacks, and outdoor-covered installs where regular strips fail.

The RGB system works the way you’d expect — red, green, and blue channels mix to any colour across the full spectrum. Warm amber for evenings, blue for a gaming setup, near-white for task use. A dimmer gives you full control from maximum output down to a barely-there glow. Most people end up using 20–40% brightness for ambient lighting and cranking it up only when they want the colour to make a statement.

Self-adhesive backing on the underside. Peel, press, hold. Sticks to painted MDF, tile, glass, and sealed timber without additional fixings. Clean the surface first — that’s the step most people skip and then wonder why it came off.

Pick your length:

• 1.2M (7.2W) — TV backlighting for 55–65″ screens, under a bathroom vanity, bedhead accent for a single or double bed, short shelf run
• 1.5M (9W) — Standard floating shelves, queen-size bedheads (1530mm width), wide TV back edges, short feature wall sections
• 1.8M (10.8W) — King-size bedheads (1830mm width) in one clean uncut run, kitchen splashback lighting, under-island bench lighting
• 2.1M (12.6W) — Wider kitchen bench runs, stair landing lighting, ceiling cove sections in medium rooms
• 2.4M (14.4W) — Full-width feature wall bases, long shelf runs, cove lighting in larger rooms where shorter units would need a join

Multiple strips connect in series off a single 24V power source for longer runs. All lengths run at 24V — easy to daisy-chain across a wall or room.

If you’re doing a feature wall with vertical panel grooves, the 1.2M or 1.5M strips tucked into individual groove channels give a neon-style vertical accent that the images on this page show clearly. Each groove gets its own strip; the colour runs along the full depth of the groove and the silicone diffuser stops it looking like a line of individual dots.