WPC Starter Edge Teak

WPC Starter Edge Teak is the base profile that sets up the first board of a Teak WPC cladding installation. At 50mm x 55mm x 3000mm, it gives that opening course a level, secure position to sit in, matched in tone to the Teak cladding it supports so the wall reads as one finished line from the ground up.

Most of the attention on a cladding job goes to the visible finish, but this piece does its work before any of that’s even in play. Here’s what it involves:

• Teak colourway, matched to complement timber-look WPC cladding once installed.
• Sets the level, fixed starting point for the first board of an installation.
• 50mm x 55mm profile, sized to hold that first course securely.
• 3000mm length, suited to standard wall run lengths.
• Needs to be fitted with proper allowance for WPC expansion and movement.

(*Dimensions: 50mm x 55mm x 3000mm)

Applications and Suitable Use

• First-course installation on Teak facades – the starting point every subsequent board relies on
• New builds specifying Teak WPC cladding – establishes the baseline before the main run goes up.
• Ground-level wall sections – need correct clearance above paving or landscaping for drainage.
• Renovation projects replacing an old starter detail – reset the baseline for a fresh Teak install.
• Larger commercial facades – keep long board runs properly aligned from the first course onward.

Why Choose WPC Starter Edge Teak?

The starter edge isn’t something anyone notices once a wall’s finished, but it’s the one component that decides whether the rest of the boards actually sit straight. Fitted level, with the correct drainage clearance and allowance for WPC movement, it gives a Teak facade a genuinely solid foundation. Skip that accuracy at the start, and it’s the kind of error that only gets more obvious the higher the wall goes.